9V/1kV DC/DC converter

9V/1kV DC/DC converter

Robert Gawron’s home insect electrocution project:

Currently I’m working on a device to electrocute home insects like cockroaches, progress is small because they are smarter than I thought, but that’s a different story. For that project I had to find a source of sufficient high voltage and output power. Presented in previous post 5V/400V converter had insufficient voltage and power, another option, flyback transformer was too dangerous to be used here.
Finally, I have made a new high voltage supply based on an inverter transformer and voltage doubler. It seems to be ok for this job, but it can be used in various other applications so I’m presenting it in a separate entry.
Warning! the device produces high voltage that can be lethal, if you want to build it, please take cautions.

Project info at Robert Gawron’s blog

9V/1kV DC/DC converter

Currently I’m working on a device to electrocute home insects like cockroaches, progress is small because they are smarter than I thought, but that’s a different story. For that project I had to find a source of sufficient high voltage and output power. Presented in previous post 5V/400V converter had insufficient voltage and power, another option, flyback transformer was too dangerous to be used here.
Finally, I have made a new high voltage supply based on an inverter transformer and voltage doubler. It seems to be ok for this job, but it can be used in various other applications so I’m presenting it in a separate entry.
Warning! the device produces high voltage that can be lethal, if you want to build it, please take cautions.
The transformer was salvaged from old LCD monitor, it was used there to power fluorescent tube. It costs around 6$, so they are not expensive. Unfortunately I couldn’t find Eagle component library for it, so I had to make a new one. Q1 initially hasn’t had a radiator, but later I added a small one because it was getting warm.
Full output voltage is present on R11, so it was protected against accidental touch by using a shrink tube. It’s not the best way, but it’s still better than nothing. All connectors have latches to avoid accidental slip out – important, especially for high voltage ones.
High voltage traces have bigger clearance to prevent spark gaps. Positive power supply rail has bigger width, because the current is around 330mA.
As visible on the rendering, by an accident I swapped top/bottom layer of two diodes. Opss!
A square generator is made from IC1A and IC1B, frequency depends on C1, R3, R4, pulse width depends on an R3 and R4 ratio. The signal is buffered by using IC1C and IC1D. Voltage doubler is made from C9, C10, D4, D5.
Output voltage = 1kV is at frequency around 11-14kHz, to minimize power consumption, I decided reduce output voltage to around 850V, this is equivalent to 5kHz from the generator.
If nothing is connected to the output, then even after power was turned off, C9, C10 can store enough power to provide unpleasant shock. To protect against that, discharge resistor R5 was added. C9 doesn’t have one, so it keeps a high charge even after the device was powered off.
Input voltage = 9V DC, power consumption = 3W.
R3, R4, C1 may be chosen differently in order to provide a a bit lower/higher voltage and smaller power consumption.
Below is the signal on Q1 gate.
Output voltage changes over time, room temperature, no load.
Please ignore SV1 and R1 – this part is completely wrong – pin 1 of IC1A should be connected to Vdd or to pin 2 of the same gate. This area was supposed to turn on or off the generator by using an external control module, but it should be connected with pin 8 of IC1C and 12 of IC1D. In the current implementation, when the generator is disabled, t1 is fully opened. Dummy error.
Eagle files for this project can be downloaded from my GitHub repository.

Check out the video after the break.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

sundar

i blog about everthing

razonexpresses

Attempt to Rise Above.

Chris Martin Writes

Sowing Seeds for the Kingdom

BJ Thoughts...

80% of it is pure imagination

Dean J. Baker - Poetry, and prose poems

My books: https://www.amazon.com/Dean-J.-Baker/e/B00IC6PGQM

Paul Bernal's Blog

Privacy, Human Rights, Law, The Internet, Politics and more

cwmcdonald.wordpress.com/

CW McDonald Photography - Imperfections & Imagination

SG Photography

❈ Silvia Ganora Photography ❈

Hapgood

Mike Caulfield's latest web incarnation. Networked Learning, Open Education, and Digital Polarization

Jean Philip De Tender

everything is a story

Eagle-Eyed Editor

Making you laugh and learn about writing, editing, social media and more!

austin vivid photography

heather schramm-lifestyle photographer

Serendipity

Was I born a masochist or did society make me this way? I demand unconditional love and complete freedom. That is why I am terrible.

%d bloggers like this: